澳门金沙4787.com官网_www.7727.com_澳门金沙js57com

央视CCTV《工匠肉体》唯一当选品牌、暖气片十大品牌——森拉特欢迎您的到来!

400-826-3533

手机版澳门金沙国际微信小秘书

www.2061.com
澳门金沙国际
澳门金沙国际

暖气片常见故障的解除

Elimination of Common Faults of Radiator

2016-12-29

Switch to English

1、散热器主体部分不热:

次要集合鄙人进下出的安装方法上,缘故原由为散热器内部有气体不能排挤。
处理方法为将排气阀开启,将散热器内部气体排挤。
或查抄体系能否压力过小或流量过低。

2、散热器团体不热:

下进下出的安装方法,查抄散热器安装时能否将导流阀高低位置安装倒置;
长进下出的安装方法,查抄散热器安装时能否未将流阀开启。大概是体系否存在成绩。

3、散热器有水声:
次要集合在长进下出的安装方法上,缘故原由为散热器内部有气体不能排挤。
处理方法为将散热器供水阀门封闭,将排起阀开启,将散热器内部气体排挤,
封闭排气阀,将供水阀门开启便可。
如不能解除应查抄体系能否流量过低或体系轮回水含宇量过大。

4、散热器震惊:

查抄散热器挂件能否松动,如挂件未松动应查抄体系上能否存在震源招致散热器共振。

1.Radiator body is not hot:

Mainly concentrated in the next way into the next installation, the reason for the radiator inside the gas can not be discharged.

The solution is to open the exhaust valve, the radiator internal gas discharge.

Or check the system is too low pressure or flow is too low.

2.Radiator as a whole is not hot:
Down into the next installation, check whether the installation of the radiator up and down position of the diversion valve installed upside down;

Up and down the installation method, check whether the installation of the radiator flow valve is not open. Or whether there is a problem with the system.

3.Radiator sound of water:

Mainly in the upper and lower out of the installation, the reason for the radiator inside the gas can not be discharged.

The solution is to close the radiator water supply valve, the discharge valve will open, the radiator internal gas discharge,

Close the exhaust valve, the water supply valve can be opened.

If you can not rule out the system should check whether the flow is too low or the system circulating water gas content is too large.

4.Radiator vibration

Check the radiator pendant is loose, such as the pendant is not loose should check the system on whether there is a source of heat sink resonance.


上一个:

下一个:

澳门金沙国际